O-200

[flyer1]

I am planning on rebuilding my O-200 for my t-craft an F19.
I would like any tips,help or advice for this rebuild.
I plan on new ECI Titan cylinders, a light wt starter and generater
any suggestions on brands?
Air wolf oil filter and oil/air seperater?
Also looking for ideas on a new prop. I am looking for as much speed as I can get. Climb is not a concern as I live and fly in the
flat lands of the midwest.

Mike

[Billy Cave]

wings

Mike, I don't know diddly about your post but glad to see you here! I won't be looking for wings again til after christmas!

[Acroeric]

Mike- I tried many different props on my 0-200 powered Clipwing and although it has a little different drag characteristics I think you may run in to the same thing. I found that at or around 49" of pitch the airplane did not go any faster and the climb performance went to crap. I think that somewhere around 110 mph the drag really starts to be exponential- and the higher pitch does nothing but load the engine. My best all around prop for what it sounds like you are looking for was a 72 47 McCauley. You will get about 105-110 in cruise and a respectable climb.
Eric