Announcement

Collapse
No announcement yet.

Landing gear specs.

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Carrieve
    started a topic Landing gear specs.

    Landing gear specs.

    After a few years I am getting N43955 back in shape after hitting a snow bank on skis. Does anyone have any specs as far as "toe-in" for the gear? Being an auto tech almost all cars have a slight toe-in. If I am splayed, is there any simple way of adjusting or changing it? Doing a rough measurement I have about 1/4" of toe out right now. Thanks for any info.

  • M Towsley
    replied
    Covered before, also look at page 3 for more comments from Astjp2, (Tim), on this. https://vb.taylorcraft.org/forum/tay...a-bc12-d/page4

    Leave a comment:


  • Carrieve
    replied
    Thanks tribe. I will put a nice long pipe and do some bending.

    Leave a comment:


  • N96337
    replied
    I've always set them from 1/16 to 1/8" toe in. Like 3D said...big long pipe on the axle with pads and tweak it in. Make sure you measure and use a chalk line to make sure which one needs adjusting.
    John

    Leave a comment:


  • 3Dreaming
    replied
    A big long pipe on the axle.

    Leave a comment:

Working...
X